เครื่องทดสอบวัสดุแบบพลวัตร (Dynamic Testing Machine) ยี่ห้อ ibertest รุ่น UFIB Series

หมวดหมู่สินค้า: Hydraulic Universal Testing Machine
รหัส :
เครื่องทดสอบวัสดุแบบพลวัตร หรือเครื่องทดสอบวัสดุแบบไดนามิค (Dynamic Testing Machine) มีให้เลือกตั้งแต่ขนาด 15 ถึง 500 กิโลนิตัน (1.5 และ 50 ตัน) สามารถใช้ทดสอบวัสดุต่างๆ ได้หลากหลาย เช่น โลหะ คอนกรีต ไม้ คอมโพสิต พลาสติก ยาง วัสดุชีวภาพ วัสดุทางการแพทย์ วัสดุแขนขาเทียม วัสดุด้านทันตกรรม และโครงสร้างต่างๆ เป็นต้น
ราคา 0บาท

12 พฤษภาคม 2563

ผู้ชม 73 ผู้ชม

Product Description

Your solution for dynamic materials testing

The UFIB series of hydraulic testing machines are completely customizable to the needs of our clients. With no initial limitations each case is individually studied.

Advantages for dynamic test materials

  • Total adaptation to customer needs and requirements of the dynamic test
  • Equipped with dynamic load cells
  • Fully configurable to specimens dimensions but retaining all stiffness criteria.
  • Automatic operation with servocontrolled test speed in strength, amplitude, frequency and deformation.
  • Ready to perform a wide variety of tests and dynamic fatigue, depending on the selected test fixtures.

Main features:

Dynamic test frame: Provides structural support with the right dimensions to accommodate the actuator and dynamic test fixtures, manufactured according to the geometry and size of the test specimens. Frame rigidity is such that ensure no resonance during the dynamic test, under any possible condition. Hydraulic actuator for dynamic testing: is designed according to the type of dynamic test, frequency and duration. You can chose between hydrostatic piston, or pistons with low friction seals. Hydraulic unit for dynamic testing being able to provide the required flow at the maximum pressure. Equipped with high performance dynamic servovalves so it can perform optimal control test parameters. Dynamic parameters are defined by the constant of dynamic testing rate. The rate constant indicates the relationship between the amplitude and frequency of the dynamic test at full load. Dynamic Load cell: extremely robust design to absorb side loads and allow real-time measurements Control System: Independent control module for dynamic test MD5 with 5 kHz control frequency, and up to 8 measuring synchronous channels, A/D converters to ± 180,000 real resolution points of measurement.

More information

Any IBERTEST testing machine is subject to numerous quality control tests during the manufacturing process. Our laboratory verificates key structural components using various equipment, calibrated and traceable, such as profile projectors, durometers, profilometer 3D coordinate machine, gauges, thermometers, metrological reference tables, etc. All our machines pass a final and definitive verification of performance and functionality, being subjected to a calibration process by our calibration laboratory, accredited by ENAC (ILAC member). The UFIB dynamic testing machine, also allows static testing with the use of appropriate devices and accessories. Test examples with UFIB Testing Machines:

  • Tensile test according to ISO 6892, ISO 1608, EN 10002 – 1 and ASTM E23.
  • Compression test according to ASTM D695
  • ASTM E290 bending test
  • NADCAP GE- S400 test
  • ASTM E 139 creep test
  • ASTM E190 test on welds
  • EN 1002-5 testing of high temperature materials
  • ASTM E 1012, Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
  • BS 7270 Metallic materials. Constant amplitude strain controlled axial fatigue. NFA 03403 fatigue testing at low frequency
  • Tensile and compression tests on ceramic matrix composite.

No limitation of the types of geometry of the specimen: standardized specimens with threaded or machined head, flat, welded metal joints mechanical and adhesive bonds among others. No limitation on the test material: steel, titanium, aluminum, wood, composites, plastics, elastomers, rubbers, biomaterials, cement, medical materials, prosthetic, dental.

Model UFIB-15 UFIB-25 UFIB-50 UFIB-100 UFIB-250 UFIB-500
Maximum load ±15 kN ±25 kN ±50 kN ±100 kN ±250 kN ±500 kN
Class according to ISO 7500-1 Class 0.5
Load Measurement Universal strain-gage load cell HBM or INTERFACE for static and dynamic tests.
Measurement calibrated range 1 to 100% of the load cell nominal capacity
Force resolution 5 digits with floating point
Columns 2 chromed plated and grounded columns
Mobile Crosshead Can be freely positioned in height by means of side jacks.
Guided by columns. With hydraulic stop.
Free horizontal distance (distance between columns) 420 mm 560 mm 650 mm 720 mm
Free vertical distance between standard gripping heads ¹ 0-540 mm 0-500 mm 0-800 mm 0-950 mm
Max. free vertical distance between load cell and pistom stem 800 mm 1220 mm 1570 mm 1600 mm 1650 mm
Measurement of piston position 5 digits (3 integers and 2 decimals)
Piston stroke 100 mm (± 50) ² 150 mm (± 75) ²
Power supply Three-phase 380 V + N + T, 50/60 Hz
(Power to define according to hydraulic group)³
Dimensions testing frame 4 (Width x Depth x Height) 750x600x2100 mm 900x600x2500 mm 1100x800x2800 mm 1250x900x2900 mm 1350x900x3200 mm
Approx. weight without testing devices 680 kg 720 kg 980 kg 1300 kg 1600 kg 1950 kg

NOTES:

(1) Free vertical distance between standard gripping heads model IB-HYDY. Greater distance is possible on demand.
(2) Other piston strokes available: 150 mm (± 75); 200 mm (± 100) y 250 mm (± 125).
(3) The characteristics of the hydraulic unit are specific to the application and the needs of each client.
(4) IBERTEST can design and manufacture larger testing frames, according to your testing needs.

Please contact our Sales Department.


N/A
Engine by shopup.com