เครื่องทดสอบวัสดุอเนกประสงค์ แบบเสาคู่ (Twin Column Universal Testing Machine) ยี่ห้อ ibertest รุ่น TESTCOM Series

หมวดหมู่สินค้า: Electromechanical Testing Machine
รหัส :
เครื่องทดสอบวัสดุอเนกประสงค์ แบบเสาคู่ ขนาด 5 - 100 กิโลนิตัน สามารถใช้ทดสอบแรงดึง แรงกด แรงดัดโค้ง แรงฉีก แรงเฉือน และแรงลอกดึง ของวัสดึต่างๆ เช่น โลหะ ไฟเบอร์กลาส พลาสติก ฟิล์ม ยาง กระดาษ และบรรจุภัณฑ์ต่างๆ
ราคา 0บาท

10 พฤษภาคม 2563

ผู้ชม 88 ผู้ชม

Product Description

The electromechanical desktop solution for materials testing

High stiffness and optimal performance in a small design.

With touch PC all in one, directly attached to the test frame to maximize ergonomics and reduced working space.

Advantages for materials testing

Optimized test space to perform any materials testing, using the right accessories.

Automatic operation, servocontroled in force, displacement and strain.

Mobile crosshead, powered by two prestressed ballscrews, guided by two chromed steel columns.

Extended frame Options, preserving maximum stiffness criteria for materials testing at large dimension or high elongation.

Ability to equip it with several load cells to improve accuracy of measurement and control at very low loads.

Automatic recognition of cells and extensometers.

More information

IBERTEST as official calibration laboratory accredited by ENAC, calibrate whole our machines according to international standards for verification of performance and functionality.

This is done with highly qualified staff, specially trained for such tasks.

This series of electromechanical machines can perform many tests: tensile test according to ISO 6892, EN 10002 – 1and ASTM E23, ASTM E290 bending test, tests according to NADCAP GE- S400 , CREEP ASTM E 139 , ASTM E190 test on welds , testing shear, material testing at high temperature EN1002 -5 compression test ASTM D695, ASTM E 1012, ISO 1608, fatigue tests with constant amplitude BS EN ISO 7270, fatigue tests at low frequency NFA 03403, ASTM D412.

Test can be performed on specimens of different sizes and shapes of preparation: standardized specimens with threaded head or machined flat, welded metal joints mechanical, adhesive bonding, etc.

All materials for their test specimen dimensions fit in the maximum capacity of the machine, can be tested in the testing machine TESTCOM: steel, elastomers, wood, rubber, aluminum, composites, titanium, plastics, biomaterials, cement, equipment medical prosthetic tooth.

Model

TESTCOM-5

TESTCOM-5/E

TESTCOM-10

TESTCOM-10/E

TESTCOM-20

TESTCOM-20/E

TESTCOM-30

TESTCOM-50

TESTCOM-100

Class ISO 7500-1

0.5 from 1% to 100% FS.

Maximum load

5 kN

10 kN

20 kN

30 kN

50 kN

100 kN

Force measurement

Universal (tensile-compresion) extensometric-bands load cell, Additional load cells can be installed

Measuring range

From 1 % to 100 % of the load cell nominal capacity

50 - 5,000 N

1000 - 10,000 N

200 - 20,000 N

300 - 30,000 N

500 - 50,000 N

1,000 - 100,000 N

Force resolution

0.1 N*

Columns

2 grounded columns, chrome-plated steel

Ball screw

2 high precision ball screw, with scrapers

Mobile crosshead

Driven by the ball screws, guided by the 2 columns, End of stroke with proximity detectors, Automatic return to start test position, defined via WinTes32 software.

Motor drive

Synchronous servomotor (Brushless) with direct drive to screws by reducers
Enables displacement and load closed loop control (servocontrol)

Gear transmission

Motor-pulley and reducer-pulley connecting via HTD precision teeth belt
Adjustable belt-tightening system

Movement speed range

0.01 to 1,000.00 mm/min

0.5 to 500.00 mm/min

Load speed range (kN/s)

Between 1% and 10% of maximum load capacity (others on demand)

0.0005 to 0.5

0.001 to 1

0.002 to 2

0.003 to 3

0.005 to 5

0.01 to 20

Crosshead position measurement

Encoder

Resolver

Crosshead position resolution

0.001 mm (1 micron)

Power supply

Single-phase 220V + earth, 50/60 Hz

Vertical free light with load cell, without fixtures

700 mm (1200 mm E version)

1100 mm

1300 mm

Free distance between columns (or adapter and column)

425 mm

450 mm

Dimensions (mm)

720x510x1320* mm (*1720 mm E Version)

1800x900x685 mm

2150x900x705 mm

Approx. weight without testing fixtures

120 kg (140 kg E Version)

385 kg

525 kg

Safety

Emergency push-button, located in the front of the machine

Note : 5 digits with floating point.

 


Engine by shopup.com